Request a Quote
Fine grind · Made to order

40 Mesh Crumb Rubber

425-micron fine crumb for binders, sealants and compounds that need rubber to blend in, not stand out. Made to your sieve curve.

40 mesh crumb rubber pouring from a stainless steel scoop

What 40 mesh means

Under ASTM D5603, a 40-mesh product has zero retained on a No. 30 sieve (600 µm) and no more than 10% retained on a No. 40 sieve (425 µm, about 0.017 in). Most of the material is finer than 425 microns, roughly the size of fine table salt and smaller.

Compared with 30-minus, 40 mesh cuts off the coarser end of the curve. That means fewer visible particles in a finished product and faster reaction in hot binders.

ASTM D5603 mesh designations (examples)
Product designationZero screen (0% retained)Designation screenMax retained on designation screen
10 meshNo. 8 (2.36 mm)No. 10 (2.00 mm)5%
20 meshNo. 16 (1.18 mm)No. 20 (850 µm)5%
30 meshNo. 20 (850 µm)No. 30 (600 µm)10%
40 meshNo. 30 (600 µm)No. 40 (425 µm)10%
80 meshNo. 60 (250 µm)No. 80 (180 µm)10%

Summarized from ASTM D5603 Table 1 / ASTM D5644 §4.2. Buy the current standard from ASTM for the full table.

Why 40 mesh

  • Faster reaction in asphalt. FHWA-HIF-20-043 notes finer GTR, smaller than 420 µm (40 mesh), disperses more easily and reacts faster with asphalt binder than coarse crumb.
  • Smoother sealants and coatings. Less grit, better leveling.
  • Better as a compounding filler. ASTM D5603 exists precisely because recycled vulcanizate rubber "allows the rubber compounder to add a certain percentage of rubber filler back into its parent or similar compounds."

Where 40 mesh goes

Terminal-blend and dry-process asphalt

FHWA reports terminal-blend binders typically use 30 to 80 mesh GTR (30-40 most common), and today's dry processes run 30 to 40 mesh. If your binder spec wants everything finer than 600 µm with a controlled top end, 40 mesh fits. See rubberized asphalt.

Hot-pour crack sealants

Rubberized crack sealants rely on fine rubber dispersed in asphalt. See sealants & coatings.

Coatings, adhesives and compounds

For formulators who want rubber in the matrix, not sitting on top of it.

Hot rubberized crack sealant being poured into an asphalt crack
Hot-pour rubberized crack sealant. Fine grinds disperse better in the asphalt base.

Worked example

A terminal blender at 8% GTR

A terminal producing a rubber-modified binder at 8% GTR by weight of binder (inside FHWA's 5-15% typical range for terminal blends) runs 500 tons of binder a week:

  • 500 tons × 8% = 40 tons = 80,000 lb of 40 mesh per week
  • That's about 2 truckloads a week, roughly 40 supersacks

At that pace you want a supplier that can schedule production. That's how we run made-to-order grades.

Send your 40 mesh spec. Send grade, volume, delivery city/ZIP and your target price.

Request a Quote

Spec sheet

Spec sheet · RE-40M
Nominal size40 mesh (exact range confirmed at quote)
Full sieve distributiontypical finer asphalt-grade crumb. Full sieve table on request.
Sieve standard / test methodASTM D5644 (lot sieve report on request)
Residual steel (max)typical ≤0.10% by weight (ASTM D5603)
Fiber (max)Production target ≤0.01% by weight (ASTM D5603)
Moisture (max)typical ≤1.0% by weight (ASTM D5603)
Specific gravitytypical ~1.15
Source / classificationtypical recycled passenger and/or truck tires · ground rubber (ASTM D5603)
AvailabilityMade to order — volume confirmed at quote
PackagingSupersacks / bulk bags, with or without pallets · typical ~2,000 lb net per sack (confirmed on quote). Gaylords or loose bulk on request.
Minimum ordertypical one supersack (~2,000 lb) · truckload programs preferred
Lead timetypical made-to-order lead time confirmed at quote

typical = representative or industry-standard value, confirmed per lot and in your written quote. Mesh labels alone don't describe the full distribution.

Download the 40 mesh PDF data sheet.

Frequently asked questions

Is 40 mesh in stock?

40 mesh is made to order. Send your sieve curve, monthly volume and start date; we confirm feasibility and lead time before you commit.

What's the difference between 40 mesh and 30-minus?

30-minus allows particles up to 600 µm. A true 40-mesh product has zero retained on 600 µm and caps what's held on 425 µm at 10%. It's finer and more uniform at the top end.

Can you hit a custom curve, like 40-80?

Tell us the target. Narrow windows are possible; we'll confirm what's realistic and what it does to lead time.

Do you sell smaller quantities for trials?

Yes. A lab sample or a single supersack for a plant trial is fine. Note it on the quote form.

Sources: ASTM D5603-23 (scope and Table 1), ASTM D5644-23 §4.2; FHWA-HIF-20-043 (2020).

Need crumb rubber
by the truckload?

Send your grade, quantity and delivery ZIP or export destination. We'll review availability, packaging and freight, then come back with a written quote.

Request a Quote CallEmail