Request a Quote
Available · Lot COA on request

20-30 Mesh Crumb Rubber

A tight mid-range cut between granule and fine crumb. Smoother than 10-20, more body than 30-minus, and screened to a window you can actually spec.

Close-up of 20-30 mesh crumb rubber

What 20-30 mesh is

20-30 mesh crumb passes a No. 20 sieve (850 µm, about 0.033 in) and is mostly retained on a No. 30 sieve (600 µm, about 0.024 in). It's a narrow cut: you're paying for a screened window, not everything below a top size. That matters when your process cares about uniformity more than about cost per pound.

Compare it to its neighbors:

Grade Top size (passes) Character
10-20 mesh 2.00 mm Coarse granule, bounce and drainage
20-30 mesh 850 µm Uniform mid-size, clean surface
30-minus 600 µm Fine crumb plus fines, high volume
40 mesh 425 µm Fine, formulation-friendly
Four piles of tire rubber from coarse chip to 10-20 mesh, 30 mesh and 80 mesh powder
Rubber from coarse chip to powder. 20-30 sits in the middle of the range.

Why choose a narrow cut

  • Predictable binder demand. Finer particles have more surface area and soak up more binder. A tight cut keeps binder use steady from batch to batch.
  • Cleaner molded surfaces. Fewer coarse granules poking through, fewer fines dusting the mold.
  • Consistent swell in asphalt. In wet-process and terminal-blend binders, particle size affects how fast rubber reacts with hot asphalt. FHWA-HIF-20-043 notes that finer GTR disperses more easily and reacts faster.

Where 20-30 mesh goes

Molded and extruded goods

Finer-faced mats, tiles, and molded parts where 10-20 looks too coarse. Often run as a surface layer.

Asphalt binders

Some agency gradations straddle this size. FHWA reports typical paving GTR sizes ranging from about 1.5 mm down to 420 µm (15 to 40 mesh). Check your spec's gradation band; we'll check the lot.

Sealants and coatings

For formulators who need a mid-size filler that still trowels or sprays. For finer needs, see 40 mesh and 80 mesh.

Export

A clean, well-defined grade that's easy for overseas buyers to spec.

Worked example

A tile maker switching from 10-20 to 20-30 for the wear layer

A gym-tile maker runs a two-layer tile: a coarse 10-20 base and a finer wear layer. The wear layer is 25% of the tile weight. For a 40,000 lb production month:

  • Wear layer: 40,000 × 25% = 10,000 lb of mix
  • At 8% binder (inside the 3-10% range Huntsman publishes for smaller molded products), crumb = 9,200 lb of 20-30 mesh, roughly 4-5 supersacks
  • Base layer: 30,000 lb of mix → about 27,600 lb of 10-20 mesh

One truck, two grades, one supplier. We can mix grades on a single load.

Quote 20-30 mesh for your next run. Send grade, volume, delivery city/ZIP and your target price.

Request a Quote

Spec sheet

Spec sheet · RE-2030
Nominal size20–30 mesh
Full sieve distributiontypical zero on No.16; ≤5% retained on No.20. Lot COA available.
Sieve standard / test methodASTM D5644 (lot sieve report on request)
Residual steel (max)typical ≤0.10% by weight (ASTM D5603)
Fiber (max)Production target ≤0.01% by weight (ASTM D5603)
Moisture (max)typical ≤1.0% by weight (ASTM D5603)
Specific gravitytypical ~1.15
Source / classificationtypical recycled passenger and/or truck tires · ground rubber (ASTM D5603)
AvailabilityAvailable — volume confirmed at quote
PackagingSupersacks / bulk bags, with or without pallets · typical ~2,000 lb net per sack (confirmed on quote). Gaylords or loose bulk on request.
Minimum ordertypical one supersack (~2,000 lb) · truckload programs preferred
Lead timetypical 3–10 business days for in-stock grades; allocation confirmed at quote

typical = representative or industry-standard value, confirmed per lot and in your written quote. Mesh labels alone don't describe the full distribution.

Download the 20-30 mesh PDF data sheet.

Frequently asked questions

How is 20-30 different from 30-minus?

20-30 is a screened window between 850 and 600 µm. 30-minus is everything that passes 600 µm, fines included. 20-30 is coarser and more uniform.

Can I combine 20-30 and 10-20 on one truck?

Yes. Mixed loads are fine. Each grade ships in its own labeled supersacks.

Do you have lot sieve data?

Yes. Ask for the lot's sieve report (ASTM D5644 method) with your quote.

Is 20-30 available in volume?

It's available now. Volume and schedule are confirmed on your quote. If you need a recurring program, say how many loads a month.

Sources: ASTM E11 sieve openings; ASTM D5644; FHWA-HIF-20-043 (2020); Huntsman SUPRASEC® MDI molded rubber crumb sell sheet.

Need crumb rubber
by the truckload?

Send your grade, quantity and delivery ZIP or export destination. We'll review availability, packaging and freight, then come back with a written quote.

Request a Quote CallEmail