The source
The U.S. Tire Manufacturers Association (USTMA) publishes a scrap tire management summary every two years. The most recent widely published edition covers 2021 and was released in 2022. It's the standard reference for how scrap tires are used in the U.S., and almost every industry article quotes it.
We're not a market research firm. But we buy, grind and sell into these markets, so here's a plain-English read of the numbers that matter to buyers.
The headline
According to USTMA, in 2021 the U.S. generated millions of tons of scrap tires, and the two largest end markets were nearly tied:
| End market | Share of scrap tires (USTMA 2021) | Tons |
|---|---|---|
| Ground rubber | ~28% | ~1.41 million |
| Tire-derived fuel (TDF) | ~28% | ~1.39 million |
USTMA put ground rubber at more than 77 million tires worth of material.
Inside ground rubber
USTMA breaks ground rubber down by use (2021):
| Ground rubber use | Tons (USTMA 2021) |
|---|---|
| Molded and extruded products | 485,000 |
| Playground and landscape mulch | 391,000 |
| Rubber-modified asphalt | 141,000 |
| Fine ground rubber | 79,000 |
USTMA also noted that sports surfaces use rose about 35%.
What this tells a buyer
- Molded products are the biggest ground rubber market. Molders compete for 10-20 and coarser grades. If you mold, line up recurring supply. See molded rubber products.
- Asphalt is a real but smaller market at 141,000 tons. Paving demand is seasonal and project-driven, so 30-minus inventory matters when bids hit. See rubberized asphalt.
- Sports surfaces are growing, which pulls on turf-sized granules (10-20, 8-16).

Inside TDF
USTMA's 2021 numbers for TDF users:
| TDF user | Tons (USTMA 2021) |
|---|---|
| Cement kilns | 682,000 |
| Pulp and paper mills | 524,000 |
| Electric utility boilers | 187,000 |
The EPA describes tires as having "the same amount of energy as oil and 25% more energy than coal." EPA supports responsible TDF use at permitted facilities. Some users need de-wired TDF; specs vary by kiln or boiler.
What this tells a TDF buyer
Cement kilns are the anchor market. Mills and utilities follow. If you burn TDF, your size and wire spec decide which processor fits. Our TDF page covers sizing and what to ask.
Reading the numbers carefully
A few cautions when you see these stats quoted:
- Year. The 2021 data is from a report released in 2022. Markets move; check for a newer USTMA edition.
- Tons vs tires. Reports use both. A passenger tire and a truck tire weigh very different amounts.
- Shares vs totals. "28%" of scrap tires is a share of all generated, not of all recycled.
- Categories. "Ground rubber" covers everything from coarse mulch to fine powder. Don't assume it all competes with your grade.
- Source. Quote USTMA directly, not an article quoting an article.
Size definitions behind the numbers
ASTM D6270, the standard practice for using scrap tires in civil engineering applications, gives useful definitions:
- Ground rubber: particles 2 mm and smaller
- Granulated rubber: particles up to 12 mm
- Tire-derived aggregate (TDA): pieces from 12 mm to 305 mm
Our grades, from 80 mesh powder to ABR, sit in the ground and granulated ranges. TDF is its own fuel market.
What it means for supply
The numbers point to a market with two large outlets (ground rubber and fuel), a big molded segment and steady growth in sports surfaces. For buyers, that translates to:
- Lock in recurring volume for core grades instead of buying spot
- Expect seasonality in asphalt and turf
- Ask for lot data so you can compare suppliers on quality, not just price
- Look at freight, since delivered cost often decides the deal (see supersack shipping and freight)
Where we fit
We keep millions of pounds of 30-minus on hand, produce about 200,000 lb a month of 10-20, make other meshes to order and supply ABR and TDF. All shipped from Central Ohio in supersacks, with or without pallets.
Tell us your grade and volume. We'll quote it fast. Send grade, volume, delivery city/ZIP and your target price.
Request a QuoteHow a scrap tire becomes crumb
The market numbers make more sense when you know the path a tire takes:
- Collection. Tires are collected from tire dealers, fleets and drop-off points by registered haulers in most states.
- Shredding. Whole tires are cut into large shreds.
- Granulating. Shreds are reduced into smaller chips and granules while steel is removed with magnets and fiber is removed with air separation and screening.
- Screening. The rubber is sized into grades such as 10-20 or 30-minus on screens. Oversize goes back for regrinding.
- Fine grinding. Finer grades such as 40 and 80 mesh need additional grinding steps.
- Packaging. Finished grades are packed in supersacks and shipped.
Every one of those steps costs energy and labor, and fine grades take more processing. That's one reason fine powders are a smaller market than coarse granules.
What drives demand year to year
- Road budgets and agency specifications drive rubber-modified asphalt.
- Construction, agriculture and fitness markets drive molded products such as mats and flooring.
- School and municipal budgets drive sports field and playground work.
- Energy markets and permits drive TDF demand at kilns, mills and utilities.
- State policy, including tire fees and market development grants, shapes how much material is processed and where it goes.
Using the data in your own planning
If you're a buyer, the numbers can help you plan. A molder knows that molded goods are the largest ground rubber market, so competition for granulated rubber is real, and recurring contracts make sense. A paving contractor knows asphalt demand is seasonal, so ordering ahead of the paving season makes sense. A turf contractor knows sports surfaces are growing, so locking in infill supply before the summer install rush makes sense.
And if you're writing a grant, a board report or a sustainability summary, cite USTMA directly, with the report year, so readers can check the numbers.
A note on reuse and retreading
The end-market numbers cover tires that leave service as scrap. Before a tire becomes scrap, some are reused as used tires or retreaded, especially commercial truck tires. Those tires stay out of the scrap stream for longer. When a truck tire finally can't be retreaded, its thick, all-black tread rubber is exactly what grades such as ABR are made from.
What the numbers don't tell you
Market totals are national. They don't tell you what's available in your region this month, how consistent a given supplier's lots are, or how far the material has to travel to reach you. A national report might show plenty of ground rubber, while a specific grade in a specific region is tight during paving or turf season. That's why buyers should treat the USTMA numbers as context, then talk directly with suppliers about stock, lead times and lot data for the grade they need.
Glossary of terms you'll see in market reports
- Scrap tire: a tire that can no longer be used for its original purpose.
- Ground rubber: rubber particles of 2 mm and smaller (ASTM D6270), often called crumb rubber.
- Granulated rubber: larger particles, up to 12 mm (ASTM D6270).
- TDF (tire-derived fuel): shredded or chipped tires used as fuel.
- TDA (tire-derived aggregate): tire pieces from 12 mm to 305 mm used in civil engineering projects (ASTM D6270).
- Rubber-modified asphalt: asphalt binder or mix that contains ground tire rubber.
- Molded and extruded products: mats, flooring, pavers and other goods made by binding or forming crumb rubber.
- End market: the final use of the material, such as fuel, asphalt or molded products.
Keeping up with the market
USTMA updates its summary every two years, and state environmental agencies publish their own scrap tire reports. If you're planning capacity, a contract or a new product, check the newest editions and talk with suppliers about what they're seeing right now. The national numbers set the stage; your supplier relationships decide whether your plant has rubber on the day it needs it.
Why this matters for Ohio and the Midwest
The Midwest sits in the middle of a dense network of tire dealers, fleets, processors and end users: molders, asphalt plants, cement kilns and turf contractors. Short hauls between scrap tire sources, processors and buyers keep freight costs down, which makes regional supply relationships especially valuable. For buyers in Ohio, Indiana, Michigan, Pennsylvania, Kentucky and nearby states, a Central Ohio supplier can often deliver in a day.
Frequently asked questions
What percentage of scrap tires become crumb rubber?
USTMA's 2021 report put ground rubber at about 28% of scrap tires, roughly 1.41 million tons.
What's the biggest use of ground rubber?
Molded and extruded products, at 485,000 tons in 2021 per USTMA.
How much scrap tire rubber goes into asphalt?
USTMA reported 141,000 tons for rubber-modified asphalt in 2021.
Who uses tire-derived fuel?
Cement kilns (682,000 tons), pulp and paper mills (524,000) and utility boilers (187,000), per USTMA 2021.
Sources: USTMA, 2021 U.S. Scrap Tire Management Summary (USTMA news release); U.S. EPA, Tire-Derived Fuel (archive); ASTM D6270.





